Instead buying emergency lights that require their own dedicated circuits, utilize the existing fluorescent fixtures in your lighting plan as backup units! Dual Lites emergency ballasts utilize nickel cadmium batteries that will keep a single T8, T10 or T12 tube running long after AC power in the building fails. They re compact, lightweight and can even be ordered with an optional battery warmer for AC-controlled computer rooms and walk-in freezers.

Features

• Ballast Type: Emergency
• Wattage: 14-54W
• Lamp Type: T8, T10, T12 linear fluorescent
• Lumens (at 10-feet): 500 lm
• UL 924 listed emergency device
• Min Max Temp: 32° to 122°F
• Battery heater option available for colder locations
• 90-minute emergency runtime
• Includes Nickel Cadmium battery with 24 hour recharge time
• Includes integral LED test switch
• 120 or 277V line voltage input, 60Hz cycles
• 5-year full warranty

• Application

  The UFO-RP1 can be placed inside a fixtures ballast channel that has a minimum internal height of 1.15 and will work in tandem with the normal AC ballast. When electricity is flowing properly, this emergency fluorescent ballast will remain off, in charging mode. This transformer can also be used to retrofit an existing emergency fluorescent unit with 14-54 watt lamps.

  Each fixture rigged with a UFO-RP1 will lay an impressive 500 lumens of floor coverage, providing up to 6 feet of adequate emergency illumination on either side of the light source. A battery heater can be purchased that allows for installation in cold climates as low as -4° F!  

  External Specifications

  This fluorescent lamp emergency battery pack has an unfinished cast aluminum case that weighs in at less than 2 lbs. It has a reduced profile with two mounting feet on either end that fits most standard 2 or 4 foot luminaries. The ballast also includes an LED charging indicator that can be installed to the body of the fixture for routine battery testing, per UL guidelines.

  

  Electrical Specifications

  Dual Lites fluorescent emergency ballast includes a Nickel Cadmium battery that remains in charging mode when the AC current is flowing. Once power is interrupted, end-of-lamp-life circuits will delay the battery for 3 seconds to prevent false tripping and save bulb life. It will operate a single 2 foot or 4 foot T8, T10 or T12 lamp between 14-54W and is ideal for office buildings with 120 or 277 line voltages.

  Dimensions

  • Width: 10.6”
  • Height: 1.05”
  • Depth: 2.05”

  • Compliance

    • UL 924 Listed
    • UL Damp Location rated
    • NFPA 101 Life Safety Code
    • NFPA 70 National Electrical Code